{"product_id":"deck-cannon-hms-sirius-1786","title":"Deck Cannon - HMS Sirius 1786","description":"\u003cp\u003eYou build a naval cannon as a ship carried it: run up to its port in a planked bulwark and held there by its rigging, with its ball rack, hand spikes and bucket on the deck beside it. The cannon is made to display, and it does not fire. The subject is a deck gun from HMS Sirius, flagship of the First Fleet, shown at 1:20.\u003c\/p\u003e\n\u003cp\u003eThe kit is rated Beginner, and one small cannon covers woodwork, painting and simple rigging. We recommend you dry fit each stage before gluing, as the instructions do from the first step. If you are drawn to \u003ca href=\"\/collections\/warship-model-kits\"\u003enaval history\u003c\/a\u003e, this model cannon kit makes a compact first project.\u003c\/p\u003e\n\u003cp\u003eWe design and make the kit ourselves, and this store is the only place to buy it. The instructions, answers to your questions and any missing or broken parts (replaced free within 30 days of purchase) all come straight from us.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/0459\/9660\/files\/KTMS1007-Sirius-Deck-Cannon-Instructions-V4.0-v2.pdf?v=1793516780\"\u003eDownload the instructions and parts list (PDF, version 4.0)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's in this model cannon kit, part by part\u003c\/h3\u003e\n\u003cp\u003eThe laser-cut wooden parts come on two numbered boards, with strip timber, dowel and a parts card of small fittings and cord. In build order:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck section:\u003c\/strong\u003e base, bulwark with its gun port and two supports, deck, waterway and four feet. You start here: plank the bulwark inside and out with 0.5 x 5 mm teak strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGun carriage:\u003c\/strong\u003e two cheeks, front and rear bases and a transom, on four wheels with axles cut from 5 mm dowel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuoin:\u003c\/strong\u003e a wedge with a walnut strip and a small grip, on a quoin runner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCannon barrel and capsquares:\u003c\/strong\u003e from the parts card, each capsquare hinged on a short length of wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye pins\u003c\/strong\u003e in the carriage and bulwark, the anchor points for the rigging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGun tackle:\u003c\/strong\u003e one each side, each made up from two 7 mm two-hole blocks reeved with cord, four blocks in all.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreeching rope,\u003c\/strong\u003e with two hooks you bend from brass wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck fittings:\u003c\/strong\u003e a cannon ball rack with four cannon balls, two hand spikes, a bucket with its lid and cord handle, a rope coil and a name plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll the rigging parts come in the box: the four blocks, the cord, the eye pins, the rings and the wire for the hooks, along with the parts for the deck fittings.\u003c\/p\u003e\n\u003ch3\u003eHow the cannon worked, shown on the model\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuoin:\u003c\/strong\u003e a wooden wedge slid in or out under the rear of the barrel to raise or lower its aim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand spikes:\u003c\/strong\u003e levers for moving the carriage into place and lifting the rear of the barrel while the quoin was reset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapsquares:\u003c\/strong\u003e hinged straps that close over the trunnions, the stubs on each side of the barrel, and hold it down on its carriage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGun tackle:\u003c\/strong\u003e a block-and-rope purchase each side, from the bulwark to the carriage, that hauled the cannon out to its port and held it there.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreeching rope:\u003c\/strong\u003e a heavy rope made fast to the bulwark either side and passed round the cascable, the knob at the back of the barrel, to stop the cannon's recoil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn a model ship, the cannons can be rigged with similar tackle and breeching, so the kit doubles as practice for a ship's guns.\u003c\/p\u003e\n\u003ch3\u003ePaint, finish and the extra jobs this cannon kit needs\u003c\/h3\u003e\n\u003cp\u003eYou paint the carriage, cannon ball rack and spike handles red. You paint the wheels, barrel, capsquares, feet, the inside edge of the bulwark supports, the cannon balls, the spike heads and the bucket lid black. You stain the quoin runner walnut, and give the deck and bulwark a light spray of clear satin or matt polyurethane.\u003c\/p\u003e\n\u003cp\u003eBeyond glue, sandpaper and paint, you drill small holes (1 mm, 2 mm and pin holes), file the spike heads and bucket staves to shape, and fill any gaps in the carriage with wood filler. You also cut dowel, wire, chain and cord to length, and seal the knots on the blocks with a dab of PVA.\u003c\/p\u003e\n\u003cp\u003eMaking up the gun tackle means tying a shaped eye pin to each block, then reeving the blocks in pairs with cord. Making the rope coil is the last job.\u003c\/p\u003e\n\u003ch3\u003eCannon kit specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eScale: 1:20\u003c\/li\u003e\n\u003cli\u003eLength: 140 mm (about 5.5 in)\u003c\/li\u003e\n\u003cli\u003eWidth: 140 mm (about 5.5 in)\u003c\/li\u003e\n\u003cli\u003eHeight: 50 mm (about 2 in)\u003c\/li\u003e\n\u003cli\u003eSkill level: Beginner\u003c\/li\u003e\n\u003cli\u003eCode: KTMS1007\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the ship that carried this cannon, see the \u003ca href=\"\/products\/hms-sirius-1786-cross-section\"\u003eHMS Sirius 1786 Cross Section\u003c\/a\u003e. More First Fleet history in our range: \u003ca href=\"\/collections\/first-fleet-model-ships\"\u003eFirst Fleet model ships\u003c\/a\u003e. Other \u003ca href=\"\/collections\/beginner-ship-model-kits\"\u003eBeginner ship model kits\u003c\/a\u003e.\u003c\/p\u003e","brand":"Modellers Shipyard","offers":[{"title":"Default Title","offer_id":51979150557548,"sku":"KTMS1007","price":118.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/0459\/9660\/files\/Ship-Model-Modellers-Shipyard-Sirius-Deck-Cannon_1-1-768x768_jpg.webp?v=1744949043","url":"https:\/\/modellersshipyard.com\/products\/deck-cannon-hms-sirius-1786","provider":"Modellers Shipyard","version":"1.0","type":"link"}