Beginner model ship kits

Our beginner model ship kits are wooden kits designed for a first build, for adults new to the hobby.

Read moreRead less

The nine model ship kits for beginners here are a lifeboat and a longboat, one- and two-masted colonial vessels, a paddle steamer, a wartime motor fishing boat and a ship's deck cannon. In the box are laser-cut parts, the timber, rigging cord and fittings, and printed, step-by-step A3 instructions with full-colour photographs. Tools, glue and paint are not included. Choose by how much rigging you want, by finished length, or by a ship whose story you are interested in. We design and make the kits, and this store is the only place to buy them. Each kit's product page has its full instructions as a PDF, so you can read them before you order.

In every beginner kit

  • Laser-cut parts you shape and fit
  • All the timber and rigging cord
  • Full-colour step-by-step A3 instructions

You'll need your own tools, glue and paint.

Showing 9 kits

Hear when these kits are back

5 of these 9 kits are out of stock right now. Leave your email and we'll tell you when they're back, and when a new kit is released.

An email when there's a new kit or a restock. Unsubscribe any time.

Buying guide

Choosing your first model ship kit

The best wooden model ship kits for beginners are the ones you finish: a hull you can manage, a rig you are ready for and a ship you care about. We rate every kit we make Beginner, Intermediate or Advanced, and all nine here are Beginner kits, designed for a first build.

Buying a gift for someone new to the hobby? Choose a ship they are interested in, then check the step-by-step PDF on its product page to see how much rigging it has.

What a first build of these kits involves

Wooden kits ask for patience. In model ship building kits for beginners like these, you shape and fit each part rather than snap it into place. As the instructions put it, "Few, if any, parts can be simply glued in place without some preparation." You also make some parts from the strip and dowel supplied.

The instructions run the build in roughly this order:

  1. Dry fit, then glue the bulkheads to the keel.
  2. Fair the bulkheads so the planks lie flat.
  3. Plank the hull, then fill, sand and finish it.
  4. Add the deck fittings and furniture.
  5. Step the masts and tie the rigging, on the kits that have them.
  6. Add the finishing touches.

The Deck Cannon has no hull: you plank its bulwark inside and out with teak strips. The Paddle Steamer Isabella has no masts: you plank its hull with basswood strip and build its paddle wheels and cabins.

Seven of the nine are double planked: the Norfolk, Mermaid, Longboat, Mary Byrne ketch, Krait, Port Jackson and James Caird. The Port Jackson's instructions explain the advantage: you practise planking on the first layer, sanding high spots and filling low ones before the second layer covers it. The Norfolk, Mermaid and Port Jackson instructions call fairing "a very important part of the preparation for planking the hull".

Take your time over reshaping parts, fairing, bending planks round the bow, and rigging the blocks and shrouds, with deadeyes on most rigged kits. The James Caird has many small parts, so take each off the board only when you need it.

Five of the seven kits with masts have no sails. The James Caird includes calico to cut its sails, deck covering and sleeping bags, and the Krait calico for its canopy, curtains and a furled sail.

Tools needed for these model kits

Each of these model kits includes the timber, rigging cord and fittings. Budget for tools, glue, paint and finishing supplies as well as the kit, because none of them is supplied. The instructions call for these tools:

  • a small drill for fine holes
  • sandpaper, with a sanding board or block on several kits
  • small files, on all but the James Caird
  • a sharp hobby knife (several kits specify a pointed blade)
  • white wood glue (PVA), super glue for metal fittings and rigging, and on most double-planked kits a contact adhesive for the second planking layer
  • wood filler, wood stain, paint and a clear finish (the James Caird uses shellac and tung oil)

Some kits also name:

  • clamps: all but the Deck Cannon and Isabella
  • a hand-held plank bender: all but the James Caird and Deck Cannon
  • a mini plane: the Norfolk, Mermaid, Port Jackson and Mary Byrne ketch
  • a grinding tool: the James Caird, Mary Byrne ketch and Krait

Compare the beginner kits

Every kit side by side, smallest to largest, so you can match one to your shelf and budget.

Kit Type Scale Length Skill level Price
Shackleton's James Caird Lifeboat 1:20 345 mm Beginner $330.00 AUD
MV Krait Motor fishing boat 1:35 610 mm Beginner $409.00 AUD
Colonial Ketch Mary Byrne 1826 Two-masted ketch 1:48 590 mm Beginner $329.00 AUD
HMS Sirius Longboat 1786 Longboat 1:24 565 mm Beginner $328.00 AUD
Paddle Steamer Isabella 1912 Paddle steamer 1:60 420 mm Beginner $287.00 AUD
Deck Cannon - HMS Sirius 1786 Deck cannon 1:20 140 mm Beginner $118.00 AUD
Colonial Sloop Norfolk 1798 Single-mast sloop 1:36 590 mm Beginner $302.00 AUD
HM Cutter Mermaid 1817 Single-mast cutter 1:48 590 mm Beginner $338.00 AUD
Colonial Schooner Port Jackson 1803 Two-masted schooner 1:50 590 mm Beginner $338.00 AUD

What builders say

In their own words

Buying guide

Questions about beginner model ship kits

Still deciding?

Tell us what you'd like to build and we'll suggest the right first kit.

Ask us a question
Can I build a beginner model ship kit with no experience?

Yes. These are wooden ship models for beginners, designed for a first build. Check the kit is complete against its parts list, read the instructions through before you start, and follow their rule: "Always dry fit parts". On the Colonial Ketch Mary Byrne and Shackleton's James Caird, laser-scored fairing lines on the key bulkheads show you where to shape the hull.

Is double planking too hard for a first kit?

Not on these kits. The seven double-planked kits are boats and colonial vessels from 345 mm to 610 mm long. The Colonial Schooner Port Jackson's instructions explain the advantage of two layers: the first is practice, and any mistakes in it are covered once the second goes on.

Which model ship kits for beginners have the least rigging?

For the least rigging on a first build, choose the Paddle Steamer Isabella or the Deck Cannon: neither has a mast, and the cannon's only rope work is its gun tackles, with small blocks, and a breeching rope. Four kits carry one mast. The two-masted Port Jackson and Mary Byrne ketch are a step up in rigging while still Beginner kits, and the James Caird has two masts, a main and a mizzen. For what each rig means, see sailing kits by rig.

What should I build after my first kit?

An Intermediate kit, once you have completed one or two. That range runs from sailing ships such as the Colonial Brig Perseverance and the Matthew Turner Brigantine to the HMA Submarine AE1/AE2, so choose the next ship the way you chose the first. See intermediate kits.

Can I see the instructions before I buy?

Yes. Each kit comes with printed A3 instructions, and its product page has the complete set as a PDF. Download it before you order to read through the build in detail, with the parts list and the tools each stage calls for.