Armed Schooner Hannah 1775
- Skill
- Intermediate
- Scale
- 1:48
- Length
- 680 mm
The armed schooner George Washington put into service in 1775.
Our wooden sailing ship model kits are historic ships and boats you build yourself from laser-cut parts, timber and rigging cord, and you rig most of them too.
The range starts with small boats, a lifeboat and a longboat, then a sloop, a cutter, two schooners and a ketch. Further up are a brig, a brig-rigged sloop, a brigantine and one fully rigged ship, with a Dutch jacht, a whaler and an Admiralty-style model alongside. Six are Beginner, six Intermediate and two Advanced. We design and make every kit ourselves, and this store is the only place to get them, so you buy direct from the people who make them.
In every kit
You'll need your own tools, glue and paint.
Showing 14 kits
The armed schooner George Washington put into service in 1775.
The New Bedford whaler that carried six Irish prisoners out of Fremantle in 1876.
Robert Campbell's 136-ton brig, launched in Sydney in 1807.
Built as the Clyde merchant ship Sea King, converted to a Confederate cruiser in 1864.
Smaller first project
Shackleton's lifeboat, sailed across the Southern Ocean to South Georgia in 1916.
An Admiralty-style model of the colonial ketch Mary Byrne, with its framing left open.
A coastal trader inspired by the celebrated brigantine Galilee.
The ship that made the first recorded European contact with Australia, in 1606.
The oldest, smallest and fastest of the eleven First Fleet ships.
A two-masted trader of the kind that worked early colonial rivers and coasts.
The working longboat of HMS Sirius, flagship of the First Fleet.
Single mast
Lent to Bass and Flinders in 1798 to prove Van Diemen's Land was an island.
Single mast
Phillip Parker King's survey cutter, charting Australia's northern coasts from 1817.
Built to drafts sent from England for the new colony at Port Jackson.
10 of these 14 kits are out of stock right now. Leave your email and we'll tell you when they're back, and when a new kit is released.
The rig decides how much rigging you take on. On the real ships, more masts and more square sails meant more lines, and on the model ship each line is yours to tie. Sailing ship models are defined by their hull, masts and rigging, and our model sailing ship kits climb from small boats to one fully rigged ship. A small schooner or a single-masted boat with a simpler rig is the usual beginner project; save a heavily rigged ship for later.
A rigged ship has two kinds of rigging: standing rigging, the fixed lines that hold the masts up, and running rigging, the lines that work the sails on a real ship. The Type column in the comparison table shows each kit's type at a glance.
A schooner sets its sails along the line of the hull rather than across it, on two masts or more. We make two schooner model kits, one from each side of the world.
Colonial Schooner Port Jackson 1803 is a Beginner kit. In September 1788 Governor Arthur Phillip asked England for vessels, and plans were drawn up for a schooner to serve Port Jackson. Our kit is taken from those original drafts, which the National Maritime Museum in Greenwich still keeps, so it follows the original ship design. It is also the model schooner one builder chose as his first wooden boat kit.
Armed Schooner Hannah 1775 is an Intermediate kit: a schooner model ship of the vessel George Washington hired into the Continental Army's service, which sailed from Beverly, Massachusetts on 5 September 1775.
Choose a sailing ship model kit by your experience level, the space you have and the rig you want to take on. Our model ship kits range from Beginner to Advanced in difficulty, and the Beginner kits come with the same laser-cut parts and full-colour, step-by-step A3 plans as the rest.
Our two model boat kits are Shackleton's James Caird, the shortest kit at 345 mm, and the HMS Sirius Longboat at 565 mm. Both are Beginner kits of real historic boats, and either makes a good wooden sailing boat model to start with before a ship.
The four Beginner sailing vessels, the Norfolk, Mermaid, Port Jackson and the Mary Byrne ketch, all finish 590 mm long, so you choose by the ship and its rig, not shelf space. See every Beginner ship model kit.
The larger rigged ships are Intermediate kits: Perseverance, HMS Supply and the Matthew Turner, with Hannah, the Duyfken and the Admiralty model at the same level. The biggest ship models by length are CSS Shenandoah (1,080 mm at 1:84 scale), Perseverance (880 mm), the Matthew Turner (870 mm) and the Catalpa (850 mm). The Shenandoah and Catalpa are our two Advanced kits.
Check height as well as length. Perseverance stands 740 mm tall and the Catalpa 720 mm; the four 590 mm Beginner hulls stand 450 to 490 mm. A rigged model ship collects dust in its lines, so plan a covered or cased spot for it. For where to start in general, see all our model ship kits.
Our model sailing ships represent vessels from 1606 to 1916. Most celebrate the age of sail in American and Australian maritime history, and between them they served exploration, trade and naval warfare. One boat belongs to neither history: the James Caird, which Shackleton sailed from Elephant Island to South Georgia in 1916.
Hannah sailed for the Continental Army in 1775. The Matthew Turner Brigantine is a trader inspired by the brigantine Galilee. The Catalpa was the New Bedford whaler that carried six escaped Irish prisoners out of Fremantle in April 1876. CSS Shenandoah began on the River Clyde as the British transport Sea King and became the only Confederate vessel to sail around the world. CSS Shenandoah and Hannah both sit in our warship model kits, for builders drawn to naval history.
The Duyfken, a Dutch jacht of the Dutch East India Company, was the first European ship known to reach Australia. HMS Supply and the Sirius longboat sailed with the First Fleet. Governor Hunter lent the Norfolk to Bass and Flinders, who sailed around Van Diemen's Land and proved it was an island. The Mermaid was Phillip Parker King's survey cutter, charting the Australian coast from 1817. Robert Campbell launched the Perseverance at the site of Australia's first shipbuilding yards, and the two Mary Byrne kits recall the ketches that worked colonial rivers.
Every kit side by side, smallest to largest, so you can match one to your shelf and budget.
| Kit | Type | Scale | Length | Skill level | Price |
|---|---|---|---|---|---|
| Armed Schooner Hannah 1775 | Armed schooner | 1:48 | 680 mm | Intermediate | $360.00 AUD |
| New Bedford Whaler Catalpa 1876 | Whaler | 1:48 | 850 mm | Advanced | $400.00 AUD |
| Colonial Brig Perseverance 1807 | Brig | 1:48 | 880 mm | Intermediate | $400.00 AUD |
| CSS Shenandoah Model 1864 | Fully rigged ship | 1:84 | 1080 mm | Advanced | $600.00 AUD |
| Shackleton's James Caird | Lifeboat | 1:20 | 345 mm | Beginner | $330.00 AUD |
| Mary Byrne Admiralty 1826 | Admiralty-style model | 1:48 | 380 mm | Intermediate | $306.00 AUD |
| Matthew Turner Brigantine | Brigantine | 1:48 | 870 mm | Intermediate | $431.00 AUD |
| Duyfken 1606 | Dutch jacht | 1:48 | 480 mm | Intermediate | $338.00 AUD |
| HMS Supply 1787 | Brig-rigged sloop | 1:60 | 610 mm | Intermediate | $472.00 AUD |
| Colonial Ketch Mary Byrne 1826 | Two-masted ketch | 1:48 | 590 mm | Beginner | $329.00 AUD |
| HMS Sirius Longboat 1786 | Longboat | 1:24 | 565 mm | Beginner | $328.00 AUD |
| Colonial Sloop Norfolk 1798 | Single-mast sloop | 1:36 | 590 mm | Beginner | $302.00 AUD |
| HM Cutter Mermaid 1817 | Single-mast cutter | 1:48 | 590 mm | Beginner | $338.00 AUD |
| Colonial Schooner Port Jackson 1803 | Two-masted schooner | 1:50 | 590 mm | Beginner | $338.00 AUD |
What builders say
Modellers Shipyard 1:20 'James Caird' - This was such a lovely kit to build
An excellent product from Modellers Shipyard, quality materials, clear and well-written instructions.
I have really enjoyed this build
Best I have ever seen. So easy to follow without any ambiguity.
In 50+ years of modelling very few kits have made my jaw drop and go Wow!. This one has. The plans are a dream.
This was my first wooden boat kit and I'm quite pleased with the way that it turned out.
Before you choose a sailing kit
Still deciding?
Ask the people who design and make the kits. We'll tell you honestly which one suits your experience.
Ask us a questionEvery tall ship is a sailing ship, but not every sailing ship is a tall ship. A tall ship is a large, traditionally rigged sailing ship, most often square-rigged, and the term is loose rather than a formal class. If you are looking for tall ship model kits, ours is CSS Shenandoah 1864, a fully rigged ship. The rest are smaller vessels and boats.
Usually not. Avoid starting with a complex ship as your first wooden kit. A fully rigged ship carries the most rigging of any kit here, and rigging takes careful planning, which is why CSS Shenandoah is one of our two Advanced kits. It is also the longest in the range at 1,080 mm, and the Catalpa runs to 850 mm. For a first model ship, builders do better with a sloop, cutter, schooner or ketch from our Beginner kits, then a brig or brigantine.
A schooner is a sailing vessel rigged fore and aft, with at least two masts. We make two. The Colonial Schooner Port Jackson 1803 is a Beginner kit that finishes 590 mm long at 1:50 scale. The Armed Schooner Hannah 1775 is an Intermediate kit, 680 mm long at 1:48. One is Australian, the other American.
Only from this store, direct from the people who make them, and we ship worldwide. Delivery times, import duties and returns are set out on our all-kits page. A kit marked "Join wait list" is out of stock for now, and the rest are ready to order.
Most don't. Our rigged ships come with the timber and rigging cord for the masts, spars and rigging, but no sails: the rigging is the part you build. Two kits are the exception. Shackleton's James Caird includes calico cloth to cut its sails, deck covering and sleeping bags from, and the MV Krait includes calico for its canopy, curtains and a furled sail. A rig name such as "two-masted schooner" describes the sail plan the real ship carried, not anything in the box.
Most are models of named historic ships and boats. Of the rest, the Matthew Turner Brigantine is inspired by the brigantine Galilee, and the two Mary Byrne kits represent the kind of ketch that worked colonial rivers. The Colonial Schooner Port Jackson 1803 is drawn from the original schooner drafts held at the National Maritime Museum, Greenwich.