Single mast
HM Cutter Mermaid 1817
- Skill
- Beginner
- Scale
- 1:48
- Length
- 590 mm
Phillip Parker King's survey cutter, charting Australia's northern coasts from 1817.
Our wooden warship model kits are models of real naval vessels from 1775 to 1943 that you build yourself in timber.
The vessels come from four services: the Continental Army, the Royal Navy, the Confederate States Navy and the Royal Australian Navy, plus one boat in Australian service in the Second World War. They include an armed schooner, a flagship's gun and a cross section of the same ship, an armed tender, a survey cutter, a commerce raider, a submarine and a fishing boat used in a wartime raid. Each box holds laser-cut parts you shape and fit, the timber, rigging cord and fittings, and full-colour, step-by-step A3 instructions. Tools, glue and paint are bought separately. These wooden model warships stop at 1943, with no modern battleships or aircraft carriers.
In every kit
You'll need your own tools, glue and paint.
Showing 8 kits
Single mast
Phillip Parker King's survey cutter, charting Australia's northern coasts from 1817.
The oldest, smallest and fastest of the eleven First Fleet ships.
A cross section of HMS Sirius, flagship of the First Fleet, showing her internal decks.
Smaller first project
A gun from HMS Sirius, flagship of the First Fleet.
The armed schooner George Washington put into service in 1775.
Built as the Clyde merchant ship Sea King, converted to a Confederate cruiser in 1864.
The Japanese fishing boat that carried Operation Jaywick's commandos to Singapore in 1943.
The Royal Australian Navy's first submarines, commissioned in 1914.
6 of these 8 kits are out of stock right now. Leave your email and we'll tell you when they're back, and when a new kit is released.
The model navy ships in this collection cover the Royal Navy, the Royal Australian Navy and the Confederate States Navy, plus one schooner hired by the Continental Army. Beside a commerce raider, a submarine and a flagship's gun, the range holds vessels with other work to do: a tender armed to support a fleet, a cutter in survey service and a fishing boat taken over for a wartime raid. Choose a kit by the history that interests you. Most of the kits' instructions set out the vessel's history before the building steps.
American Revolution, 1775. In 1775 General George Washington hired the schooner Hannah into the Continental Army's service, and she was armed to take British vessels supplying Boston. The Armed Schooner Hannah 1775 is our Revolutionary War ship model kit.
Royal Navy and the First Fleet, 1786 to 1787. The Deck Cannon - HMS Sirius 1786 models one of the flagship's cannons on its four-wheeled carriage. The HMS Sirius 1786 Cross Section opens the same ship to show her orlop, lower, gun and main decks, with barrels and calico hammocks inside. The HMS Supply 1787 models the small Royal Navy ship refitted as an armed tender to support the flagship. The fleet's voyage belongs with the First Fleet kits.
Royal Navy survey service, 1817. The HM Cutter Mermaid 1817 models a cutter built of teak at Calcutta and commissioned in October 1817 for the Royal Navy's survey service. A team of marine archaeologists from the Australian National Maritime Museum found her wreck in 2009.
Confederate States Navy, 1864 to 1865. CSS Shenandoah was a commerce raider, and the kit's instructions credit her with the last shot of the American Civil War, off the Aleutian Islands. At 1,080 mm, the CSS Shenandoah Model 1864 is the longest kit we make.
Royal Australian Navy, First World War. The HMA Submarine AE1/AE2 models the two E-class boats Vickers Armstrong built for the Royal Australian Navy. AE2 was launched in 1913 and both boats were commissioned in February 1914. AE1 was lost in September 1914; AE2 was the only Royal Australian Navy vessel lost to enemy action in the First World War.
Second World War, 1943. The MV Krait models the Japanese fishing boat Kofuku Maru, handed to the Australian military in 1942 and renamed Krait. Royal Australian Navy volunteers made up most of her crew for Operation Jaywick in 1943.
The kits run from Beginner to Advanced: Beginner for the Deck Cannon, Mermaid and Krait; Intermediate for Hannah, Supply, the Cross Section and AE1/AE2; Advanced for CSS Shenandoah. We rate every kit we make the same way, so you can match a level to what you have built before. We design and make every one of them and sell them only in this store.
Each warship model in this collection asks you to shape and fit wooden parts, then add its naval fittings. The instructions for six of the kits ask for patience and set one habit early: "Always dry fit parts", so you check the fit before you glue.
The Shenandoah and the Krait have laser-scored fairing lines on key bulkheads. Mermaid, Supply, the Cross Section and the Krait are double planked, the Shenandoah single planked. The Krait, Supply and Mermaid instructions have you shape planks at the bow and stern with a hand-held plank bender. The Shenandoah and the submarine come with a display stand, the Cross Section with a display board. Scales run from 1:20 to 1:90: the larger the second number, the smaller the model against the real ship.
The main difference in wooden warship model kits is the hull. Our instructions have you build it plank-on-bulkhead, the common method for wooden ship models, laying planks over a frame of laser-cut bulkheads. In a plastic kit it comes moulded. You sand, fit, stain and paint timber rather than clean up moulded parts, and most of the kits' instructions note that few, if any, parts glue in place without some preparation. The Shenandoah and Krait instructions also say to remove any excess glue, and the Shenandoah's to use it sparingly. A plastic modeller's painting and fine-detail habits still apply to wood. We don't make modern United States Navy warships, battleships or aircraft carriers: this range ends with the Krait in 1943.
The kits in this collection side by side, with each one's type, scale, finished length and skill level.
| Kit | Type | Scale | Length | Skill level | Price |
|---|---|---|---|---|---|
| HM Cutter Mermaid 1817 | Single-mast cutter | 1:48 | 590 mm | Beginner | $338.00 AUD |
| HMS Supply 1787 | Brig-rigged sloop | 1:60 | 610 mm | Intermediate | $472.00 AUD |
| HMS Sirius 1786 Cross Section | Cross section | 1:48 | 140 mm | Intermediate | $357.00 AUD |
| Deck Cannon - HMS Sirius 1786 | Deck cannon | 1:20 | 140 mm | Beginner | $118.00 AUD |
| Armed Schooner Hannah 1775 | Armed schooner | 1:48 | 680 mm | Intermediate | $360.00 AUD |
| CSS Shenandoah Model 1864 | Fully rigged ship | 1:84 | 1080 mm | Advanced | $600.00 AUD |
| MV Krait | Motor fishing boat | 1:35 | 610 mm | Beginner | $409.00 AUD |
| HMA Submarine AE1/AE2 | Submarine | 1:90 | 630 mm | Intermediate | $286.00 AUD |
What builders say
Deck Canon - HMS Sirius 1786 is a very pleasant model to make, if you are new to modeling I recommend a model of this type. A manual with photos and clear instructions is supplied with the model. There are many steps that we find in the construction of larger models such as a boat without it being complicated.
Warship kits
Still deciding?
Which navy or ship interests you, and what have you built before? Send us both and we'll suggest a warship kit to match.
Ask us a questionNo. None of our kits is a US Navy ship. Our American Revolution kit, the Armed Schooner Hannah 1775, models the schooner that General George Washington hired into Continental Army service. The United States Navy's Naval History and Heritage Command describes her as "the first armed vessel to sail under Continental pay and control". CSS Shenandoah was a Confederate ship.
Yes, one. Our Civil War ship model kit is the CSS Shenandoah Model 1864, a model of the Confederate raider commissioned in October 1864. It is rated Advanced, at a scale of 1:84, and its fittings include the Sea King figurehead, painted matt white.
One of the three Beginner kits in this collection. The Deck Cannon is a single gun on its carriage, with a planked bulwark and no hull. HM Cutter Mermaid has one mast and is double planked. MV Krait has one mast, fairing lines on key bulkheads and a calico canopy. See Beginner kits for a first build.
Yes. The Deck Cannon, our model cannon kit, has one. HM Cutter Mermaid carries two cannons and two culverins, HMS Supply four deck cannons and two culverins, the Sirius Cross Section six deck cannons and CSS Shenandoah four cannons. The barrels come in the kit and you build and finish the carriages. The submarine and the Krait carry none.
Limewood strip goes over bulkheads that carry the ballast-tank bulge. You add hydroplanes, a conning tower and periscopes, rig the aerial and rope rails and choose AE1 or AE2 name plates. Finish it surfaced, or as if submerged with the aerial mast laid down, on its display stand. The wooden submarine model kit is 1:90 and 630 mm long.